Client Roaming not working

WLAN
1

Hi,

my Clients will not Roam between the APs properly (OAW-AP1321). Even if im standing just in front of f.e. AP1 the Client is still connected with a very weak Signal to AP2 and will not switch to the AP next to him.

Every Idea/Solution for the Problem is welcome.

Thanks

2

Hello Huk,

 

I suggest you check out the WiFi Fine Tuning guidelines that you'll find in the resource section. I suspect a "sticky client" problem.

3

Easy thing to test:

Go into Performance Optimization (in the Wireless section) and set the Roaming RSSI to 15 and 30 (for 2.4 and 5GHz respectively)

Other than that, follow the above suggestions for the Finetuning Guidelines file in the resources